Grade 2, J Series Cylindrical Lock

  • ANSI : Meets ANSI-A156.2, Series 4000, Grade 2 Standards
  • UL Listings : UL Listed “A” Label 3 Hour Fire Doors
  • ADA Compliance : Meets ADA and ANSI A117.1 accessibility codes
  • Lock Chassis : Steel, Zinc dichromated for Corrosion Resistance
  • Trim : 5″ Solid zinc diecast levers, 3 3/8″ wrought brass roses
  • Lever Return: Anti-sag mechanism with independent lever return springs to prevent lever sag
  • Handing : Non-Handed-Completely reversible
  • Backset & Latchface : 2 3/4” backset std. with 1 1/8“ x 2 1/4” latchface, 2 3/8” backset is available  with
  • Latchbolt :
    • 1” x 2 1/4” latchface both with self adjusting front for square or beveled edge doors Stainless Steel with 1/2“ projection, Deadlocking on keyed functions & exit latch
  • Cylinder : 6 Pin Brass, CKwy, with 2 Keys
  • Strikes : 4 7/8″ x 1 1/4″ ASA standard – T strike & Full lip strikes available
  • Door Preparation : ANSI A115.2 – 2 1/8″ crossbore with (2) 3/8″ Thru bolt holes
  • Optional Thru Bolts : Removable Thru Bolts – Can be installed without thru bolts
  • Door Thickness : Factory Set for 1 3/4″ – can be adjusted to fit 1 3/8″ up to 2″ thick
  • Lever Design : Flat (standard, shown above)
  • Standard Finish : US26D
  • Fasteners : Combination screws for wood or metal doors & frames
  • Warranty : Limited Lifetime Warranty

PRODUCT RESOURCES

 
Design Hardware
 

Mechanical & Electronic Access Control Hardware Systems

All hardware meets ANSI/BHMA A156.13 and UL 3Hr A Label

Get your technical questions answered with installation guides, door templates, spec sheets, product catalogs, and other materials available whenever you need it.